考虑重力因素的断溶体储层“井-洞-缝”模型试井解释方法

顺北油田属于大型断裂构造运动形成的断溶体储层，纵向裂缝系统和垂向分布的溶洞是主要的储集体空间.本文提出溶洞中的压力变化是由流动和波动共同产生的，依此把能量守恒方程与试井理论相结合，建立考虑重力因素的断溶体储层试井解释方法.定义无量纲量，并对无量纲方程进行Laplace变换，得到Laplace空间上的井底压力.由Stehfest数值反演算法得到试井分析所需的图版曲线.对重力因素进行敏感性分析表明：重力因素只影响双对数曲线的末期，当重力因素很明显时，曲线特征类似于定压边界.对新疆油田的某井进行分析，解释了曲线后期下掉原因，并给出溶洞体积以及波动相关参数等，分析结果与生产实际情况相吻合.     

Lossy mode resonance-based uniform core tapered fiber optic sensor for sensitivity enhancement

A lossy mode resonance (LMR)-supported fiber optic sensor in which a uniform fiber core is placed among two identical tapered regions, is investigated numerically. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) are considered as LMR active materials used to excite several lossy modes and gold and silver are used as surface plasmon resonance (SPR) active materials. In this probe design, a central uniform core coated with ITO/AZO is the active sensing region, whereas tapered regions are meant for bringing the incident angle close to the critical angle. The sensitivity of the present fiber optic bio-sensor is evaluated for first two LMRs utilizing both ITO and AZO separately, along with its variation with the taper ratio (TR). For ITO, the maximum sensitivity values are observed to be 18.425 μm RIU⁻¹ (refractive index unit) and 0.825 μm RIU⁻¹, corresponding to the first and second LMRs, respectively, at a TR of 1.6 and for AZO, equivalent values are 0.79 μm RIU⁻¹ and 0.35 μm RIU⁻¹, respectively, at a TR of 2.0. The results illustrate that the first LMR is more sensitive than the second LMR and the ITO-coated probe possesses greater sensitivity than the AZO-coated probe for both LMRs. Similarly, for the fiber optic SPR sensor, the maximum value of sensitivity is 5.6425 μm RIU⁻¹, in the case of gold and 5.0615 μm RIU⁻¹ in the case of silver, at a TR of 1.6. Hence, the result shows that the sensor with the present fiber optic probe design has around a 3-fold enhancement in sensitivity compared with conventional SPR sensors. This study will have applications in many sensing schemes where the requirement of large sensitivity is vital.     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.     

Vacancy‐Rich Ni(OH)2 Drives the Electrooxidation of Amino C−N Bonds to Nitrile C≡N Bonds

Electrochemical synthesis based on electrons as reagents provides a broad prospect for commodity chemical manufacturing. A direct one‐step route for the electrooxidation of amino C?N bonds to nitrile C≡N bonds offers an alternative pathway for nitrile production. However, this route has not been fully explored with respect to either the chemical bond reforming process or the performance optimization. Proposed here is a model of vacancy‐rich Ni(OH)₂ atomic layers for studying the performance relationship with respect to structure. Theoretical calculations show the vacancy‐induced local electropositive sites chemisorb the N atom with a lone pair of electrons and then attack the corresponding N(sp³)?H, thus accelerating amino C?N bond activation for dehydrogenation directly into the C≡N bond. Vacancy‐rich nanosheets exhibit up to 96.5 % propionitrile selectivity at a moderate potential of 1.38 V. These findings can lead to a new pathway for facilitating catalytic reactions in the chemicals industry.     

A three-dimensional frequency selective structure based on the modes coupling of spoof surface plasmon and waveguide transmission

A three-dimensional frequency selective structure (3D FSS) was proposed by applying the spoof surface plasmon (SSP) structures into periodic waveguides, which realizes an enhanced broadband transmission in low frequencies, below the cut-off frequency of periodic waveguides. The transmission characteristics of SSP structures and periodic waveguides as well as their coupling modes are investigated by simulation and experiment method. According to our analysis, the pass-band of this 3D FSS can be customized through changing the values of structure parameters and it also has a good angular stability. In addition, this paper also provides a simple assembly plan for sample preparation. This proposal may be useful for improving filtering performances and gives an effective approach for designing 3D FSSs.     

磁电弹性体中多条位错与Griffith裂纹

根据本征方程，研究磁电弹性体中若干平行螺型位错与Griffith裂纹的相互作用.结合Muskhelishvili方法和算子理论，得到磁电弹性体中由位错和裂纹所诱导的应力场、电场和磁场的解析解.数值算例表明：在裂纹的端点及位错点上仍然存在应力的奇异性，离位错点越远处广义力越小，结论与已有的结果相符，证明了结论的正确性.当位错点与裂纹端点距离越近时，裂纹与位错间的应力场越小，并逐渐趋近于零.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

绝缘环打火研究

绝缘问题是高电压、高场强器件和设备中不可回避的问题,是决定器件、设备运行参数和稳定性的重要因素。针对一台直线感应加速器调试中出现的加速腔绝缘环在带束负载情况下的真空沿面闪络现象,进行了分析和研究。分析表明,在排除设计、材料、加工、洁净和真空度等常规异常因素后,导致绝缘环真空沿面闪络的可能因素是电子在绝缘环表面的吸附和累积,绝缘环上累积的电子来源和加速器中加速、传输的电子束的丢失有关。从加速腔工作状态出发,分析绝缘环表面积累电荷和丢失电子束的相关途径,进而提出相应的技术措施,以提高加速腔运行稳定性。     

OH+C2H3F的反应机理及产物支化比反应的理论研究

本文对HOC₂H₃F可能解离通道的势能面进行从头算CCSD(T)/CBS//B3LYP/6-311G(d，p)计算，同时对速率常数进行Rice-Ramsperger-Kassel-Marcus计算. 生成主要产物CH₂CHO+HF最有利的反应途径是OHC₂H₃F→i2→TS14→i6→TS9→i3→TS3→CH₂CHO+HF，其中速率决定步骤是HF通过TS11从CO桥接位置解离，能量比反应物高3.8 kcal/mol. 借助中间态TS14，F原子从C_α迁移到C_β位置生成CH₂O+CH₂F，然后通过中间态TS16，H从O迁移到C_α位置；通过中间态TS5，C-C键断裂生成产物，其能量比反应物低1.8 kcal/mol，比TS11低4.0 kcal/mol.